How to maintain it well? Below, we will briefly introduce some methods.
- The filter cartridge should be cleaned regularly, requiring oil-water separation and timely drainage of the air bag. Regularly check the opening and closing of the internal air circuit of the bag filter, and control the air used for cleaning. Check the degree of blockage in the filter bag. If mild blockage is found, it should be promptly removed and dried, and the blockage should be cleaned by tapping. Ensure that the ventilation capacity is maintained normally and prevent blockages from continuing to operate, creating a vicious cycle.
- To maintain a stable ventilation capacity within the mill at a good level; – Even if there are changes, the optimal ventilation rate inside the mill can still be adjusted and maintained by the suction force of the exhaust fan,.
- Regularly inspect the leakage of the exhaust gas treatment system, implement comprehensive plugging, and provide necessary external insulation for the exhaust gas system from the grinding process.
- Pay attention to controlling the feeding speed; Circular flow mill can increase the amount of powder return and improve the air temperature inside the mill. Try to extend the stopping time as much as possible before stopping the grinding, stop the mixture with high moisture content as early as possible, extend the exhaust time inside the grinding appropriately after stopping the grinding, and at the same time, do a good job of rotating the grinding body.
- A grinder equipped with water spray inside the mill should ensure good atomization. Generally, stop water 15 minutes in advance before stopping grinding. Avoid adverse effects on the filter bag after water evaporation.